Cheville d´isolateur SOT24
La goupille isolante est utilisée pour l'installation d'un isolateur à broche en porcelaine 24 kV (par exemple SDI37) sur une traverse. La goupille est en acier galvanisé à chaud.
| Code | SOT24 |
| GTIN | 6418677407932 |
| Nom | Cheville d´isolateur H=354, round washers |
| Dimensions | |
|---|---|
| Poids | 1.681 kg |
| Largeur | 44 mm |
| Longueur | 354 mm |
| ETIM | |
| ETIM Class | EC003516 |
| Type d'accessoire | Insulator pin |
| Carton | |
|---|---|
| Taille | 10 pcs |
| Profondeur | 389 mm |
| Hauteur | 185 mm |
| Largeur | 264 mm |
| Poids | 17.184 kg |
| Volume | 18.99876 l |
| Emballage palette | |
| Taille | 360 pcs |
| Profondeur | 1200 mm |
| Hauteur | 870 mm |
| Largeur | 800 mm |
| Poids | 638.624 kg |
| Volume | 835.2 l |
| Name | Code | GTIN | ||
|---|---|---|---|---|
|
Porcelain pin insulator SDI37SDI37 is used with bare wires or covered conductors. Suitable for installation on pin SOT24 (SFS 4385). The plastic sleeve in the top-groove of the insulator enables pulling of conductor without using pulleys. The conductor can be tied to the top-groove or to the neck. In angles, always tie to the neck. Creepage distance 325 mm. Neck diameter 85 mm. |
SDI37 | 6418677408731 | See product |
|
Porcelain pin insulator SDI30SDI30 is used with bare wires or covered conductors. Suitable for installation on pin SOT24 (SFS 4385). The conductor can be tied to the top-groove or to the neck. In angles, always tie to the neck. Creepage distance 325 mm. Neck diameter 85 mm. |
SDI30 | 6418677408748 | See product |
