Dispositif d´arc électrique SDI27.1
Power arc device SDI27.1 is used with SDI90.x composite insulators on angle poles with suspension clamp SO181.6 and on tension poles with tension clamps SO255 or SO256. The package includes arching horns and 95 mm² - 0.45 m conductor with cable lugs. Spark gap is adjusted to 130-230 mm on 24-36 kV.Short-circuit current: Arc test 2 x 10 kA, 1sShort circuit test:I1s=11,5 kA, 1s / Idyn=29 kA
| Code | SDI27.1 |
| GTIN | 6418677419133 |
| Nom | Dispositif d´arc électrique For tension insulators |
| Dimensions | |
|---|---|
| Poids | 0.83 kg |
| Valeurs électriques | |
| Eclateur | 90 ... 250 mm |
| Tension nominale (Un) | 12 ... 36 kV |
| ETIM | |
| ETIM Class | EC000490 |
| Type d'accessoire | Other |
| Matériau | Other |
| Traitement de surface | Other |
| Sac en plastique | |
|---|---|
| Taille | 1 pce |
| Profondeur | 350 mm |
| Hauteur | 10 mm |
| Largeur | 230 mm |
| Poids | 0.839 kg |
| Volume | 0.805 l |
| Carton | |
| Taille | 9 pcs |
| Profondeur | 375 mm |
| Hauteur | 157 mm |
| Largeur | 250 mm |
| Poids | 7.789 kg |
| Volume | 14.71875 l |
| Emballage palette | |
| Taille | 486 pcs |
| Profondeur | 1200 mm |
| Hauteur | 1140 mm |
| Largeur | 800 mm |
| Poids | 440.628 kg |
| Volume | 1094.4 l |
| Name | Code | GTIN | ||
|---|---|---|---|---|
|
Tension clamp SO255Pince de tension pour conducteurs gainés (PAS/BLL AlMgSi) et pour les conducteurs porteurs isolés des câbles aériens MT comme AHXAMK-WM3 (Multi-wiski). La partie de contact perforante d'isolant est dotée d'un joint en silicone qui empêche l'humidité de pénétrer dans le conducteur. |
SO255 | 6438100303846 | See product |
|
Tension clamp SO256Tension clamp for covered conductors PAS/BLL AlMgSi. The insulation piercing contact part has silicone seal which prevents the moisture getting into the conductor. |
SO256 | 6438100303822 | See product |
|
Suspension clamp SO181.6A suspension clamp for AAAC covered conductors. The clamp includes metallic rolls that enable conductor pulling through the clamp. Conductor joints with diameter under 30 mm can be pulled through the suspension clamp. The clamp has waterproof insulation piercing contact part, which can be used for overvoltage protection and to bring the clamp's body to line's electrical potential to prevent partial discharges and radio interference. Suitable for angles up to 90°. Suspension bolt 16 mm. |
SO181.6 | 6418677459849 | See product |
Al 185-241 mm², with plain horn
Code: SE21.1
GTIN: 6418677414312
Al 185-241 mm², with plain horn
Code: SE21.2
GTIN: 6418677411021
With plain horn, PAS/BLL-T 50-157 mm² AlMgSi
Code: SEW20.1
GTIN: 6438100305529
PAS/BLL-T 50-157 mm² AlMgSi, with plain horn and Al-thread
Code: SEW20.2
GTIN: 6438100305543